PB8100CNM1/QBack to list
PB81 series pressure transmitter is cast aluminum housing, high protection grade, is suitable for different market demand, took no performance of different configuration, at present there are mainly four series of products.Products are widely used in industrial field control, light industry machinery, environmental protection, water treatment, pharmaceutical, chemical, petroleum, shipping, water conservancy, hydroelectric and other automatic control and detection of constant pressure water supply system, the gas, liquid and steam pressure and liquid level measurement, wide range, high precision, good stability, reliable performance, easy installation and use, etc, with the reverse polarity protection, lightning protection performance is good, the advantages of radio frequency interference resistance ability.
PB8100CNM1 / Q series is a high precision, high stability and high reliability of flat membrane diffusion silicon pressure sensor, the pressure sensor elastomer adopts the imported materials, membrane separation technology, test head without hole, does not exist in the process of measuring viscous medium jam, integration structure design, suitable for chemical paint, paint, mud, asphalt, oil and other viscous medium pressure measurement and control.
● Using flat membrane structure, large contact area and the media
● Low temperature range wide, strong overload capacity and corrosion, widely applicable
● When using imported materials, membrane separation technology, test head without hole, does not exist in the process of measuring viscous medium jam
● Low integration structure design, suitable for chemical paint, paint, mud, asphalt, oil and other viscous medium pressure measurement and control
● Wide range:
0~ 60 mpa;The minimum range range: 0 ~ 5 kpa
Or 0 ~ 0.5 m or above level
● Zero, adjustable range
● With reverse polarity protection and current limiting protection
● Lightning protection, radio frequency interference resistance ability
● Wider practicability, easy installation
● Low and high precision, high stability, high reliability
● With explosion-proof properties
● IP65, protection grade suitable for outdoor installation
● Power supply, output, two wire
● Applicable to occasions with higher requirements, comply with the requirement of measurement standard
● Unique design makes the water hammer shock performance is good
● Service life is long
● According to the special requirements, can make its good freezing resistance
● HART protocol can be customized
● Food hygiene industry
● Paper industry
● Water level measurement
● Cans level measurement
● Pipe level measurement
● Pharmaceutical and biological products processing
● Accuracy: 0.25%FS,0.5%FS
● Measuring range: 0 to 800bar
● Power supply: 24VDC(12 to 36 VDC)
● Output: 4-20mA(0-5V,1-5V,0-10V,0-10mA)
● Overload: 150%FS
● Burst pressure: 300%
● Protection: IP65
● Operating temp: -20 to +85 deg C
● Sroring temp: -40 to +125 deg C
● Process connection: Flush diaphragm G1/2(1/2BSP), 1/2NPT, or customized
● Wetted parts: 304 stainless steel
● Diaphragm material: 316SS
